Tag: Contract Logistics

Thanks to the permit for temporary storage issued by the Podlaskie office of Customs and treasury in Białystok, we have the opportunity to run a warehouse for our contractors for goods with non-EU status.

Goods entering the EU at each border point are subject to the transit procedure (T1, tir, etc.). For various reasons (suspension of payment of customs duties (customs, excise, VAT), lack of documents, transhipment, further resale… etc.) the goods are not always immediately declared for final clearance / marketing authorisation.

In accordance with Article 147(1) of the UKC, goods may be stored temporarily only in a temporary storage warehouse,

Conditions and obligations for temporary storage of goods

1. Goods in temporary storage shall be stored only in temporary storage warehouses in accordance with Article 148 or, where appropriate, in other places designated or recognised by the customs authorities.

2. Without prejudice to Article 134 (2), goods in temporary storage may be subject only to operations designed to preserve them in their unaltered state, without changing their appearance or technical characteristics.

3. The holder of the authorisation referred to in Article 148 or the person storing the goods, where the goods are stored in other places designated or recognised by the customs authorities, shall be responsible:

(a) for ensuring that goods in temporary storage are not removed from customs supervision;

(B) for the fulfilment of obligations arising from the storage of goods in temporary storage.

4. Where goods cannot continue to be stored temporarily, the customs authorities shall immediately take all necessary measures to remedy the situation of the goods in accordance with articles 197, 198 and 199.

Temporary storage always entails the need to lodge a security. In the case of a warehouse, this is a flat-rate security, lodged together with the application for the opening of such a warehouse, at a place where the security is deemed to be lodged on a case-by-case basis.

The warehouse shall act as a storage place for goods originating in countries still subject to customs duties. The storage of products imported from abroad means that customs duties and other tax obligations will have to be paid only at the moment when these products are exported and placed on the market. Until then, however, they may not leave the warehouse, which is properly secured and supervised by the customs authorities. Using the warehouse allows you to postpone payments, as well as to store goods, which will then be re-exported to other countries. The main profit for the importer is the ability to pay fees as the goods collected are dispatched from the customs warehouse.

Temporary storage warehouse and customs warehouse-often confused concepts.

The first major difference is that a temporary storage warehouse can store loads for up to 90 days.

Another is the fact that the cargoes located on its territory can be prepared, labeled, and also examined by various bodies supervising the placing of goods on the market. It is also possible to carry out processes related to the processing of products or other activities preparing them for later distribution.

Temporary storage warehouse-another milestone in the pursuit of the goal.
Contract logistics consists of a number of elements creating complementarity of services.
I am pleased to inform you that the Chamber of treasury administration in Białystok has given us permission to operate a temporary storage warehouse. This is undoubtedly one of the key elements that allows us to” cultivate ” contract logistics in an even better way.
Goods entering the EU at each border point are subject to the transit procedure (T1, tir, etc.). For various reasons m.in. through suspension of payment of customs duties, customs, excise, VAT, lack of documents, transhipment, further resale, the goods do not always have to be declared for final clearance (marketing authorization). MCS this is part of a process that brings with it many opportunities in building the competitive advantage of our customers.
What are the benefits of implementing storage as part of the transport process:
1. Customs duties suspended.
We do not have to pay customs duties at the time of arrival of the cargo. We are free to circulate these funds until the need to release the goods on the market. In the case of further export, payment of the duty shall be released and transferred to the consignee.
2. Another carrier.
If they are able to tranship, they may tranship to another means of transport. This option has its economic justification in several cases:
* the carrier who receives the cargo does not need to have permits for CIS countries. He reloads it with us and gives it to a licensed carrier. Loading goods from Poland eliminates the need to have permits for third countries and the close distance from the border allows you to save on transportation and each party is satisfied,
* scheduling the transhipment at the end of the driver’s work to another (vacated) means of transport ensures continuity of deliveries.
* possibility of customs clearance in export-having a place of recognized and temporary storage warehouse, you can make customs clearance on the spot. No need to leave and wait in line at the customs house. Undoubtedly, it speeds up and streamlines the whole process. Documents are agreed in advance, and the waiting time of the carrier is reduced to a minimum. Transport planning based on these possibilities takes on a different dimension. A solid calculation of the costs, as well as the benefits of saving time and your own commitment, should give you an answer as to whether it is worth using a storage service.
The way I act is the result of many years of experience and meticulous observations of the processes occurring on the market. From where I am today, I can see all the way that I have come here and with a clear conscience I can offer responsible cooperation. Behind me is not only experience, but also the desire to improve and offer ambitious projects that will solve their problems for my partners and bring me professional satisfaction.

Our goal is to build contract logistics from the ground up.
We carefully observe the environment in order to provide our services in an even more perfect way.
Each of our projects is dictated by the fact that our services are timeless and ahead of solutions already adopted by others.
Another decision has been made….
Our offer will soon gain new services and our customers a competitive advantage.

I think that everyone should know the rules of food storage, and here is their Decalogue.
The certificate of entry in the register of establishments subject to official control of the state sanitary inspection bodies is the basis, without it there is no question of storing food products. After obtaining the entry, we begin to act:
1. Check the delivery. Always check the quality of products and packaging when delivering goods.
Means of transport can affect the quality of foodstuffs, which is why it is so important that they are kept in good technical and hygienic condition, preventing contamination and allowing the proper health quality of the transported products to be maintained. They must have a cargo area adapted to the type of foodstuffs transported, and a structure allowing easy maintenance of cleanliness and order and disinfection.
The person receiving the product should always check the condition of the goods received and refuse to accept them if the goods do not meet the relevant standards.
Before accepting food for sale or food storage warehouse, the recipient should check:
– the conditions of transport, including the cleanliness of the means of transport and packaging, the time of transport and other conditions affecting the health of the foodstuffs transported and the manner of loading to prevent contamination,
– the documentation relating to the foodstuffs, including origin and traceability, producer, date of manufacture, quantity and Lot number,
– bulk and individual packaging, in particular whether there are foreign odors, damage, dampness, packaging bombing, absence of pests, etc.,
– the labelling of foodstuffs, and in particular the date of shelf-life or the date of minimum durability, legibility and durability of the labelling.
2. Cold and dry. Keep your drinks, juices and water in a clean, cool and dry place. Do not allow products to overheat or freeze, or store them directly near heat sources (e.g. radiators).
Storage in a food storage facility at both too high and too low temperatures can affect product quality, causing loss of carbon dioxide in carbonated PET bottles, change the taste of beverages, juices and waters, precipitate or cause damage to packaging.
The recommended storage temperature for beverages, juices and water is 5-25oC. However, if the finished product specification states otherwise, the manufacturer’s recommendations shall be the overriding guidelines for the storage and storage of the product. Protect the product from freezing. A product that has been frozen cannot be sold.
It is important to ensure adequate air circulation, which will prevent excessive temperatures, humidity and pollination in the warehouse and remove contaminated air and possible odors from some finished products. Ventilation openings shall be covered with nets or other insect screens.
Storage facilities shall be equipped with devices for monitoring and recording temperature and humidity. It is recommended that the monitoring device be placed in the storage area of the products most sensitive to these factors. Monitoring devices should be placed in such a way that they can monitor the storage conditions of products depending on the storage height (in the case of high storage racks, the conditions at the ground may differ from those at the ceiling). These devices should be calibrated regularly and the readings documented.
If recharging of forklift batteries is carried out in a food storage warehouse, it must be carried out away from the storage location, in a designated location that meets all health and safety requirements.
3. Avoid sunlight. Keep drinks, juices and water out of direct sunlight.
The finished product must not be stored in places exposed to direct sunlight. If there are windows in the roof or walls of the warehouse directly above or next to stored drinks, juices and water, they should be protected from sunlight, e.g. by the use of a film with a UV filter.
Exposure to sunlight on foodstuffs, including beverages, juices and water, can lead to adverse changes in the taste, smell and appearance of products.
4. Keep the interval, not “on the floor”. Do not store the product directly on the floor. Keep your distance from the wall.
In warehouses, it is recommended to maintain a distance of about 50 cm between the walls and the rows of pallets or racks in order to maintain cleanliness and control the presence of rodents. A strip of floor with a width of about 50 cm adjacent to the walls, e.g. painted with epoxy paint with high gloss, allows easy control of the cleanliness and effectiveness of the insecticides used.
In the case of storage on pallets, the product must be stored on pallets clean and undamaged, preferably in an orderly manner.
It is good practice to arrange the products in accordance with an up-to-date warehouse plan showing the storage areas with a description of the destination, the roads of communication, the evacuation routes, the places of collection and storage of waste, the places of stopping and loading of forklifts.
Safety precautions must always be observed. Stored materials shall not obstruct or obstruct roads, roads or emergency exits.
5. Groceries separately-avoid the neighborhood of intense odors.
Drinks, juices and water-mainly in PET packaging-easily absorb foreign smells. This can cause organoleptic changes.
Beverages, juices and waters must be stored and displayed on sale away from products with an intense smell, in particular:
– chemical paints, phenolic derivatives, organic solvents, disinfectants, household chemicals and other compounds with a strong odor,
– animal feed,
– other foods, if they have an intense smell, e.g. fish, garlic.
Chemical agents and measures taken to ensure the cleanliness of storage facilities should be applied in such a way that they do not adversely affect the quality of food products stored. For example, the use of organic solvents in storage areas is unacceptable, as the contact of many solvents with PET bottles containing beverages, juices and water causes a distinct change in their odour.
Cleaning chemicals should only be stored in a properly secured room for that purpose, in packages marked visibly and allowing the identification of those substances, in accordance with separate rules. The dispensing and use of such substances should be documented and supervised by an authorised person. In a food storage facility, places should be allocated for the storage of equipment for keeping the premises and equipment clean in an amount adapted to the type and function of the premises and a supply of cleaning and disinfectants with appropriate certificates.
It is necessary to pay attention to the fungicides used for the maintenance of pallets, their intense odor very often penetrates into drinks, causing loss of quality and contamination of the product.
When repacking products, it is recommended to use a spacer between the pallet and the first layer. This protects the products from direct contact with the pallet and helps to evenly distribute the weight of the load.
In order to eliminate the possibility of contamination of beverages, juices and water by exhaust fumes, it is recommended not to use diesel combustion forklifts unless they are equipped with a soot filter.
6. Rotate the products. Use the fefo “first expires-first goes out” rule. Put the products in storage and on the shelf according to this rule.
The shorter the storage time, the lower the possibility of deterioration of the product under the influence of environmental factors. The basis of good storage practices is compliance with the FEFO (first expire – first out) rule – according to which the product with the shortest shelf life is always released from the warehouse in the first place. This rule should also be maintained on the store shelf, i.e. the oldest product should be placed at the front of the shelf.
Both in the warehouse and at the point of sale, the conditions of storage of foodstuffs, their quality and rotation of goods should be checked on an ongoing basis, so as not to allow them to expire and spoil.
7. Stick to your deadlines. Remove food items from the point of sale as soon as their “shelf life” or “shelf life” is exceeded.
Foodstuffs shall bear the date of minimum durability or shelf life. Foods placed on the market bearing an expiration date preceded by the words ‘to be consumed by:’ or a date of minimum durability preceded by the words ‘ preferably consumed before…”or” is best consumed before the end…’, may be on sale until the end of the day indicated after the word referring to that date or time limit; after that date the food may not be on the market.

We are pleased to announce that our warehouse has been entered into the register of establishments subject to the Official Control of the State Sanitary Inspectorate.

What does it mean?

We have passed the inspection and we can store your food products in unit packages. 🥳
Under the control of the Health Department, we must maintain the standards of our warehouse and be ready for inspection every day.
You can rest assured about your loads – we will certainly take care of them! 😉

#jmpmagazine
#jmplogistics center
#contract logistics

As the result of #BREXIT since 01/01/2021 there have been changes in the cross-border traffic from the UK.

What does this mean for goods exporters and importers? Are there any reasons for concern?
In our opinion, is not that scary 😉
Below is a short description and a link to the guide describing the whole process. We encourage you to read.

A carrier from an EU member state wishing to provide transport from the UK must have:
* community license
* proof of insurance for the vehicle and trailer
* certificate of professional qualification, driving license and ID card (from 01/10/2021 passport valid for at least 6 months)
* EORI number
* must record each trip in the GVMS

Depending on the customs procedure on which the goods will be cleared, the documents required for the transported goods:
* Prenotification – proof of customs declaration in the EU and in the UK – MRZ or EORI number
* Common Transit Procedure (CTC) – TAD or LRN number
* Temporary Admission Procedure (ATA) – ATA carnet
* TIR procedure – TIR carnet (ordinary procedure) or EX export declaration (simplified procedure)

A detailed guide on shipping after Brexit can be found on the website of the British government

#SposóbNaBrexit #jmpcentrumlogistyczne #jmpmagazyn #logistykakontraktowa

#WMS system – a new dimension of warehouse management, who is it for and what for?

It’s a warehouse IT system that supports the management of goodsc flow in the warehouse.
It’s time to throw away your sticky notes, binders and a million of Excel files – thanks to us you’ll collect this information in one place, we ensure its free flow and integration between company departments.

When running a production company, you don’t need to hire warehouse workers, maintain a warehouse, equipment and everything else.
We will do it for you – after all, it’s what we’re specialized in!

By handing over loads to us, each of our clients receives access to a WMS system personalized for the services they need.
You reduce the costs of warehouse management and gain a transparent tool – you are in a winning position!

By using our services (and using our WMS system), you gain:
· Ongoing control of your loads in our warehouse,
· Effective identification of goods,
· Shorter order completion time,
· Minimizing the errors occurrence .

Is it worth it? Contact us, let us do this work for you and see for yourself that warehouse management does not have to keep you awake at night.

#jmpmagazyn
#jmpcentrumlogistyczne
#logistykakontraktowa